Supervisor level
64
Opening the Supervisor level
Switch on the washing machine.
11:02
Programmes
Favourites Supervisor
Help
Touch the Supervisor selection area.
The display will change to show the Supervisor level menu.
Code-based access
The Supervisor level is accessed using a code.
The code is 000 (factory default).
After entering the code, you will be in the Supervisor level. The
individual setting options are described in the following sections.
Changing the code
You can change the Supervisor level access code to protect the
washing machine from unauthorised access.
Please inform Miele Professional Service if you have forgotten your
new code. Miele Professional Service will have to reset the code.
Make a note of your new code and store it in a safe place.
Closing the Settings menu
Touch the symbol.
The display will then go back to the previous menu level.
Touch the symbol.
The display will change to the main menu.
To Next Page
Loading...
