Special features in the programme sequence
35
Spin
Final spin speed
After a programme is selected, the maximum spin speed for this
wash programme is shown in the pre-start menu.
A reduction of the final spin speed is possible.
Depending on the programme, it may also be possible to increase the
speed. The setting options are displayed when you tap the spin
speed.
Rinse-spin
There is a spin cycle after the main wash and between the rinses. A
reduction in the final spin speed will also reduce the rinse-spin speed
accordingly.
Anti-crease
At the end of the programme, the drum continues to turn at intervals
for up to 30minutes to help prevent creasing.
The machine cannot be opened until the programme has ended.
The Anti-crease function is programme-dependent and can be
activated in the "On/Off" Supervisor level.
To Next Page
Loading...
Need help?
General
