Milesight MS-C3262-FPNA - Page 54

48
Third Stream Settings
Figure 4-3-3 Third Stream
Table 4-3-1 Description of the buttons
Parameters
Function Introduction
Video Codec
There are difference for the camera with “-A” and “-B”
-A: H.265/H.264/MJPEG available
-B: H.264/MJPEG available
Frame Size
Options include 4M(2592*1520), 3M(2304*1296), 3M(2048* 1536),
1080P(1920*1080), 2M(1600 *1200), 1.3M(1280*960), 720P(1280*720), D1
(704*576)
Maximum Frame Rate
Maximum refresh frame rate of per second
Bit Rate
Transmitting bits of data per second, this item is optional only if you select the
H.265/H.264
Bit Rate Control
CBR: Constant Bitrate. The rate of CBR output is constant
VBR: Variable Bitrate. VBR files vary the amount of output date per time
segment
Profile
The option is for H.264, Main/High can be selected according to your needs
I-frame Interval
Set the I-frame interval to 1~60, 25 for the default. This item is optional only if
you select the H.265/H.264. The number must be a multiple of the number of
frames.
JPEG Quality
Low/Medium/High/Higher are available, this item is optional only if you select
the MJPEG
Note:
The options of [Frame Size] are variable according to the model selected.