Milesight MS-C3262-FPNA - Date &Time

58
RTP Packet
There are Better Compatibility and Better Performance two options available, you
can choose one to meet your needs
Multicast Group
Address
Support multicast function
QoS DSCP
The valid value range of the DSCP is 0-63.
Note:
1) DSCP refers to the Differentiated Service Code Point; and the DSCP value is used in the IP
header to indicate the priority of the data.
2) A reboot is required for the settings to take effect.
4.3.6 Date &Time
Figure 4-3-13 Date&Time
Current System Time
Current date &time of the system