dec_stat_Milan_6/05
Declaration of Conformity for
European Community (CE) Products
This information is provided for units with CE certification (see rating label on unit).
NOTE
Manufacturer: European Contact:
ITW Welding Products Italy S.r.l. Mr. Danilo Fedolfi,
Via Privata Iseo 6/E Managing Director
20098 San Giuliano ITW Welding Products Italy S.r.l.
Milanese, Italy Via Privata Iseo 6/E
Phone: 39(02)98290-1 20098 San Giuliano
Milanese, Italy
Phone: 39(02)98290-1
Fax: 39(02)98290203
European Contact Signature:
Declares that this product: INFINITY 35/45
conforms to the following Directives and Standards:
Directives
Low Voltage: 73/23/EEC
Machinery Directives: 89/392/EEC
And their amendments 91/368/EEC, 93/C, 133/04, 93/68/EEC
Electromagnetic Compatibility Directives: 89/336/EEC, 92/31/EEC
Standards
Safety Requirements for Arc Welding Equipment Part 1: EN 60974-1: 1989
Arc Welding Equipment Part 1: Welding Power Sources: IEC 974-1 (April 1995 - Draft revision)
Electromagnetic compatibility (EMC) Product standard for arc welding equipment: EN50199: December 1995
Degrees of Protection provided by Enclosures (IP code): IEC 529: 1989
The product technical file is maintained by the responsible Business Unit(s) located at the manufacturing facility.
To Next Page
Loading...
