. A complete Parts List is available at www.MillerWelds.com
OM-281426 Page 23
5-9. TIG Welding Connections
Ref. 282724A / Ref. 282719A
! Turn off unit and disconnect
input power before making
connections.
! Do not use worn, damaged,
undersized, or repaired
cables.
1 Weld Output Receptacle
2 Work Clamp Receptacle
3 TIG Torch And Cable
4 Work Clamp And Cable
Connect TIG torch cable to the
electrode receptacle and connect
work cable to work receptacle. Turn
connectors clockwise.
Ensure all connections are tight.
5 Foot Control
6 Remote Control Cable
7 Remote Control Receptacle
Connect foot control to remote
control receptacle.
8 TIG Shielding Gas
Connection
Use Argon gas for TIG welding (see
Section 5-12).
2
1
3
4
5
6
7
8
To Next Page
