Miller Multimatic 220 AC/DC - 6-8. Entering Setup Menu

. A complete Parts List is available at www.MillerWelds.com
OM-281426 Page 36
6-8. Entering Setup Menu
1 Wire/Rod/Tungsten Minus (−) Button
2 Material Thickness Minus (−) Button
3 Material Thickness Plus (+) Button
4 Display
To enter the setup menu, simultaneously
press then release the Wire/Rod/Tungsten
Minus (−) button and Material Thickness
Plus (+) button. After entering the setup
menu, the Material Thickness light will flash.
To move to the next setup menu, press the
Material Thickness Plus (+) button.
To move to the previous setup menu, press
the Material Thickness Minus (−) button.
To exit the setup menu, simultaneously
press then release the Wire/Rod/ Tungsten
Minus (−) button and the Material Thickness
Plus (+) button.
Ref. 281252A
1
2
3
4
Notes