Miller Subarc DC 650 - Static Characteristics; Dimensions and Weights; Tipping

. A complete Parts List is available at www.MillerWelds.com
OM-265 363 Page 17
4-6. Static Characteristics
The static (output) characteristics of the welding power source can be described as drooping during the SAW process. Static characteristics
are also affected by control settings (including software), electrode, shielding gas, weldment material, and other factors. Contact the factory for
specific information on the static characteristics of the welding power source.
4-7. Dimensions And Weights
A
B
C
D
E
F
G
H
4 Holes
800 453-A / 801 530
Front
Dimensions
A 30 in. (762 mm) Including lift eye
B 23 in. (584 mm)
C
38 in. (965 mm) Including strain
relief
D 33-3/4 in. (857 mm)
E 1-1/4 in. (32 mm)
F 20 in. (508 mm)
G 1-1/8 in. (29 mm)
H 7/16 in. (11 mm) Dia.
Weight
650/800 Amp Models: 545 lb (247 kg)
1000 Amp Models: 644 lb (292 Kg)
1250 Amp Models: 650 lb (295 Kg)
4-8. Tipping
! Do not move or operate unit
where it could tip.