Miller Subarc DC 650 - Placing Jumper Links

. A complete Parts List is available at www.MillerWelds.com
OM-265 363 Page 20
4-12. Placing Jumper Links
Ref. 265 207-A
! Disconnect and lockout/tagout
input power before installing or
moving jumper links.
Check input voltage available at site.
1 Jumper Link Label For DC 650
Digital and DC 1000 Digital
Machines
2 Jumper Link Label For DC 800
Digital and DC 1250 Digital
Machines
3 Jumper Links
Move jumper links to match input volt-
age.
Close and secure access door, or go
on to Section 4-13.
Tools Needed:
2
1
Do not overtighten
jumper link nuts.
3/8 in.
3/8 in.
DC 650/800 Digital Models
193 546-A
2
193 526-A