Millipore DIRECT-Q 3 SYSTEM - Replacing the Vent Filter; Installing the Tygon Tubing; Purging Air from the System; Hydrating the System

MAINTENANCE
- 41 -
R
EPLACING THE VENT FILTER
The Vent Filter should be replaced whenever the
SmartPak is replaced.
 Remove the Vent Filter (L).
 Insert the new Vent Filter into the fitting. See
Section 4-5 Installation of the Vent Filter.
I
NSTALLING THE TYGON TUBING
 Install the Barbed Fitting and Tygon Tubing
(M). See Section 4-6 Installation of the Tygon
Tubing.
P
URGING AIR FROM THE SYSTEM
 See Section 4-7 Purging Air from the System.
H
YDRATING THE SYSTEM
 Hydrate the system (N). See Section 4-8
Hydrating the System.
R
EPLACING THE FINAL FILTER
 See Section 6-3 How to Replace the Final Filter
(O).
The System is now ready for use.
L
M
N
O