Millipore Elix 35 - Product Information; Elix Product Water Specifications

Product Information
Elix® 20, 35, 70 and 100 7
Chapter 2 PRODUCT INFORMATION
2-1 ELIX PRODUCT WATER SPECIFICATIONS
PRODUCT WATER FLOW RATES
ELIX 20, ELIX 35, ELIX 70 AND ELIX 100 FLOWRATES
ELIX SYSTEM
PRODUCT WATER FLOW RATE
Nominal Flow 7 – 30 °C
(See bottom 2 rows of this table)
Elix 20 20 LPH
Elix 35 35 LPH
Elix 70 70 LPH
Elix 100 100 LPH
Water temperature < 25 °C and 10 bar operating pressure.
(up to 12 bar with cold feedwater).
Water temperature ≥ 25 °C and 7 bar operating pressure.
PRODUCT WATER QUALITY
 Resistivity > 5 MΩ.cm (@25 °C) typically 10-15 MΩ.cm (when CO2 is < 30 ppm in the Feedwater)
 Conductivity < 0.2 µS/cm (@25 °C) typically 0.067-0.10 µS/cm (when CO2 is < 30 ppm in the Feedwater)
 TOC < 30 ppb
 Micro-Organisms < 10 CFU/ml
 Silica Rejection > 99.9%