Miltenyi Biotec MultiMACS Cell24 Separator Plus - Page 6

4 Setting up an experiment 55
4.1 Process selection 55
4.2 Columns 56
4.3 Target cell fraction and waste container 57
4.4 Buffer volumes 58
4.5 Large sample volumes 58
4.6 Magnetic labeling 58
5 Pre-defined processes 59
5.1 DEPLETE 59
5.2 POSSEL 60
5.3 POSSEL_2 60
5.4 POSSEL_SCA 61
5.5 POSSEL2_SCA 62
6 Custom processes 65
6.1 Creating a process 65
6.2 Replacing a process 67
6.3 Editing a process 67
6.3.1 Saving as new process 67
6.3.2 Changing parameters 68
6.4 Deleting a process 68
6.5 Testing plate height and distance for plate removal 68
7 Maintenance 71
7.1 Cleaning the instrument 71
7.2 Rotating the MultiMACS Cell24 Magnet and MultiMACS Column Holder 72
7.3 Exchanging fuses 74
7.4 Firmware version 74
7.5 Preparating for transport 74
8 Troubleshooting 77
8.1 Cross contamination by drops at the column tips 77
4