Miltenyi Biotec MultiMACS Cell24 Separator Plus - Installation; Components; Components Included in the Delivery

2
INSTALLATION
43
2
Installation
Read the instructions in the chapter Important safety information and ensure that your site is properly
prepared before continuing with installation and assembly. Incorrect installation can lead to spread of fire,
explosion, the risk of electric shocks, the risk of crushing and shearing of bodily parts, or biohazards.
2.1 Components
2.1.1 Components included in the delivery
The following components are included in the delivery of the MultiMACS Cell24 Separator Plus (#130-098-637).
Component
MultiMACS Cell24 Separator
MACS Elution Station
MACS Elution Chamber (including lid I for elution into standard deep well plates and lid II for elution into 5mL
tubes)
Tubing (connection of MACS Elution Chamber and MACS Elution Station)
Tip-Touch Plate
MultiMACS 12× Single-Column Adapter LS (for up to 12 LS, LD, or Whole Blood Columns)
MultiMACS 5 mL Tube Rack (for elution into 5 mL tubes)
Column Blank Holder
Column Blanks, 12 pieces
24-well Deep Well Plate, 2 pieces
Multi-24 Column Block
Air filter
Country-specific power cable
Null modem cable
High power CAN cable
User manual
EC/EU Declaration of Conformity
Table 2.1: Components included in the delivery.