37
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Size (see page8)
Enable to change the vertical and horizontal lengths of an object. When the values of
the vertical and horizontal lengths are interlocked (the ] mark is supplied to the right of
Size and Scale), the aspect ratio is retained. Check the [Ratio Unlock] check box to
change the vertical and horizontal lengths separately.
Scale (see page 8)
Set the magnification of the vertical and horizontal lengths. When the value of vertical
and horizontal lengths are interlocked (the ] mark is supplied to the right of Size and
Scale), the aspect ratio is retained. Check the [Ratio Unlock] check box to change the
vertical and horizontal lengths separately.
Frame (see page 19)
Cut a frame around the target object. In addition, settable the distance between the
object and the frame. It enables to peel the purpose portion of the cutting sheet easily.
(6) Total Length
Usually the width and the height of an object are displayed. When entering the number
of copies in the copy function, the total lengths along the vertical and horizontal direc-
tions for all the copies are displayed. If margins and frames are set, the length values of
them are included.
(7) Layout Option
Rotate
Rotates the object clockwise in unit of 90 degrees.
Unit
Select cm, mm, inch, or pt.
Mirror
Inverts the object in mirror image to cut it.
Ratio Unlock (see page 8)
The size of the object can be changed with variable aspect ratio.
Origin Lock (see page 12)
Lock the origin to retain the object position. Unlock the origin to cut an object with the
selected color (or layer) without wasting sheets.
To Next Page
Loading...
