MIMAKI UJV100 - Page 29

3. Consumable Item Replacement
29
2
Check the waste ink levels in the waste ink tank.
• If you note any discrepancies from actual levels, proceed to the next step.
• If there is no discrepancy, replace (dispose of) the waste ink tank referring to
[Replace the
waste ink tank.](P. 29).
3
In LOCAL mode, select [MENU] > [Maintenance], then press the [ENTER] key.
• The Maintenance menu is displayed.
4
Select [Replace Wasteinktank], then press the [ENTER] key.
• “Replace Wasteinktank Level: 80% (1.6L)” appears on the display.
5
Press
to adjust the level.
6
Press the [ENTER] key once adjustment is complete.
Replace the waste ink tank.
• Always wear safety glasses, gloves, and the mask provided when handling ink, maintenance
cleaning solution, waste ink, or other solutions used in this machine. Failure to do so may result
in ink or other liquids splashing and coming into contact with the skin, eyes, or mouth.
1
In LOCAL mode, select [MENU] > [Maintenance], then press the [ENTER] key.
• The Maintenance menu is displayed.
2
Select [Replace Wasteinktank], then press the [ENTER] key.
• “Replace Wasteinktank Level: 80% (1.6L)” appears on the display.
3
Pull the waste ink tank stopper forward.