Mindray BA-88A Operation Manual

4-1
4 Advanced Operations
4.1 Powering On
Power on the analyzer and the system will go through initialization procedure as
shown in the following figure.
Figure 4-1 Initialization Screen
After passing the self-checking, the system will prompt message to aspirate distilled
water. Press Aspirate button on the instrument. After aspiration, the main screen will
be displayed.

Mindray BA-88A Specifications

General

Light source	Halogen lamp
Display	7 inch touch screen
Printer	Thermal printer
Interface	RS232
Wavelengths	340, 405, 546, 578, 630nm
Carry-over	< 1%
Power Supply	AC 100~240V, 50/60Hz
Operating Temperature	15-30°C