Mindray BA-88A Operation Manual

4-3
0
Parameter Description
Sample ID Sample ID of the patient. If you enter the screen by selecting a test
result, the sample ID can not be edited. The sample ID should not be
void. Otherwise, the patient information can not be saved.
The entered sample ID can not be the same with the existing sample
ID of the current day.
Type The options are serum, plasma and urea, etc. You can add or delete
the types in Setup-Dictionary.
Age Age of the patients. The units are Year, Month, Day.
Gender Gender of the patient, including: Male, Female.
MRN Medical record No. of the patient.
Sender
Name of the doctor who sent the sample to the clinical laboratory.
You can add or delete the names in Setup-Dictionary.
Tester Name of the doctor who tested the sample. You can add or delete the
names in Setup-Dictionary.
Test Date The date when sample is tested.
Send Date The date when sample is sent to be tested.
Reviewed
by
Name of the doctor who reviewed the test report. You can add or
delete the names in Setup-Dictionary.
Remark More information about the patient.
The following introduces the buttons on the screen.
Buttons Function
Click this button to view or edit the information of last sample.
Click this button to view or edit the information of the next sample.
Save Save the information on setting.
Cancel Cancel all the editing and return to the status before editing.
Print Print the report of the selected sample.
Return Click this button to go back to Sample screen.
4.7 Setup
You can set hospital name, system date and time, data dictionary, touchscreen
calibration and delete history data in Setup.

Mindray BA-88A Specifications

General

Light source	Halogen lamp
Display	7 inch touch screen
Printer	Thermal printer
Interface	RS232
Wavelengths	340, 405, 546, 578, 630nm
Carry-over	< 1%
Power Supply	AC 100~240V, 50/60Hz
Operating Temperature	15-30°C