Mindray BA-88A Operation Manual

4-29
The following introduces the buttons on the screen.
Buttons Function
Add Click Add to pop up the following screen.
Select the test name (including routine test and calculation test in
the Routine drop-down list box. Enter the Quantitative and/or flag
result in the Result area.
Select test name for off-system test, enter the test result in Result
area.
Off-system tests and flags can be added or deleted in
Setup-Dictionary.
Edit After selecting a test result, click Edit to pop up the following screen.
Enter new result in Quantitative area, or select flag result. Click OK
to save the new result and return to the result report screen.
After the test result is edited, the test result displayed in the result
report screen will be updated accordingly. But the original result will
be saved.
Delete Delete the test result currently selected.
4.6.2.2 Patient Information
Parameter Description
Name Name of patient.

Mindray BA-88A Specifications

General

Light source	Halogen lamp
Display	7 inch touch screen
Printer	Thermal printer
Interface	RS232
Wavelengths	340, 405, 546, 578, 630nm
Carry-over	< 1%
Power Supply	AC 100~240V, 50/60Hz
Operating Temperature	15-30°C