Mindray BeneFusion SP3 Vet - 2 Overview; 2.2 Host; 2.2.1 Front View

2-2
2.2 Host
2.2.1 Front View
1. Alarm light
The alarm light indicates different alarm levels in different colors and flash
frequencies, please refer to Chapter 8 Alarms for details.
2. Display
Used for displaying infusion parameters and relevant content.
3. <DIRECTION>
Used for adjusting value, change lines and pages.
4. <CLEAR/BACK>
 Under the setting status, press this key to set the value to "0".
 Edited value is "0", press this key to return the value to the previous value.
 Under non-setting status, press this key to return to the previous menu.
5. <OK>
Used for entering setting status, confirming input operation and saving value.
6. <START>
 After the syringe is loaded correctly and the infusion parameters are set, press
this key to start the infusion.
 In the [Bolus] settings screen, after bolus parameters are set, press this key to
auto bolus.
7. <STOP>
During infusion, press this key to stop infusion. Infusion stops caused by alarms
(such as Occlusion), press this key to cancel the alarm.
8. <BOLUS>
 During infusion, press this key to enter the [Bolus] settings screen.
 Under non-running status, press this key to to enter the [Purge] prompt screen.