3-5
The earthing wire in the three-plug connector should be grounded, if
there is a doubt whether the AC power system is grounded or not,
please adopt the built-in battery and contact an electrical technician at
the hospital or the company.
Do not touch the power plug with wet or moist hands! If there is a liquid
drug or residue on or around the both ends of the power cord, power
socket or plug, device's AC power supply port, the user should
completely clean and dry the area before plugging into the power
supply, or accidents or injuries may result!
Compatible power supply: 100–240 V～, 50/60 Hz.
The AC power cable should be correctly inserted and secured into the
socket.
Removing power cord is to disconnect device from power supply.
Please ensure suitable clearance around the device to facilitate connect
and remove power cord.
3.2 Conventional Settings
This chapter only introduces the general settings for the syringe pump, please refer
to other relative chapters for parameters and other feature settings.
3.2.1 Adjust Alarm Sound Volume
1. Select [Main Menu]→[System Options]→[Sound Volume].
2. Select [Sound Volume]: 1-8. 1 for the lowest volume; 8 for the highest volume.
3.2.2 Adjust Screen Brightness
1. Select [Main Menu]→[System Options]→[Brightness].
2. Select [Brightness]: 1-8. 8 for the brightest setting, and 1 for the darkest setting.
When operating on battery power, you can set a low Brightness to save the
power of the battery.
To Next Page
Loading...