Mindray BeneFusion SP3 Vet - 4 Basic Operation; 4.1 Infusion Flow Chart

4-1
4 Basic Operation
4.1 Infusion Flow Chart
Load syringe
Select syringe brand
Purge air
Select infusion mode
Set infusion parameters
Connect to animal
Start infusion
Complete infusion
Turn pump on
Remove syringe
Turn pump off
Press to activate and turn on the pump, the pump
will run start-up checks and display the start-up screen;
Please refer to 4.2.2 Load the Syringe;
Select according to the syringe brand currently being
used;
Select infusion mode;
Refer to 4.2.7 Purge Air;
Refer to 4.2.8 Set Infusion Parameters;
Connect to the animal;
Press ;
Press ;
Disconnect from the animal, and remove the syringe in a
correct manner;
Hold down (>2s) , until the Power Off progress bar
complete.