Mindray BeneVision N1 - Changing Arrhythmia Alarm Settings(Arrhythmia Option Required); Disable Non-Lethal Arrhythmia Alarms (Arrhythmia Option Required); Accessing Help When Technical Alarms Occur

13
BeneVision N1 Quick Reference Guide
Changing Arrhythmia Alarm Settings
To adjust a patient’s arrhythmia alarm on the N1 monitor:
a. Select ECG waveform/numeric tile or Main Menu
quick key.
b. Select Arrhythmia tab.
c. Scroll and select individual arrhythmia.
d. Select
• On/Off – to enable or disable arrhythmia's alarm responses.
• Priority– to adjust the audio and visual alarm indicators. Level options
include High (Red), Medium (Yellow), Low (Yellow) and Prompt (audio
absent).
Note: If alarm is locked, alarm cannot be turned off or priority altered.
• Alarm Output – to activate an automatic recording when the alarm
occurs.
e. Select the Main Dialog
quick key or to return to the main display.
To adjust a patient arrhythmia threshold setting on the N1 monitor:
a. Select ECG waveform/numeric tile or Main Menu
quick key.
b. Select Arrhythmia tab.
c. Select Threshold tab.
d. Select arrhythmia threshold and adjust value using the drop down value list.
e. Select the Main Menu
quick key or to return to the main display.
Disable Non-Lethal Arrhythmia Alarms
To disable all arrhythmia alarms except lethal arrhythmias on the N1 monitor:
a. Select ECG waveform/numeric tile or Main Menu
quick key.
b. Select Arrhythmia tab.
c. Select Lethals Only.
d. Select the Main Menu
quick key or to return to the main display.
Accessing Help When Technical Alarms Occur
In the technical alarm list, alarm messages followed by Detail includes help
information.