18
BeneVision N1
Quick Reference Guide
b. Set Date and Time.
c. Set Date Format.
d. Enable 24 Hour Time if desired.
e. Enable Daylight Saving Time if desired.
f. Select the Main Menu
quick key or to return to the main display.
If the monitor is connected to a central monitoring system (CMS) or hospital
clinical system (HIS), the date and time are automatically obtained from the
network.
PARAMETER COLORS
The N1 monitor provides the ability to adjust the parameter’s numeric and
waveform (if applicable) color.
To adjust the parameter’s color on the N1 monitor:
a. Select Main Menu
quick key.
b. Select Param Color from the Parameters colume.
c. Select parameter.
d. Select color.
e. Select the Main Menu
quick key or to return to the main display.
LOAD DEFAULT (PRESET) SETTINGS
The N1 monitor settings are automatically restored either when the patient size is
adjusted or when Discharge is performed.
A clinician may restore default settings on a patient currently being monitored on
the N1 monitor by:
a. Select Main Menu
quick key, and select Load from the Configuration
column.
b. Select preset configuration from displayed list.
c. Select Load.
d. Select OK to confirm.
Note: All patient data preserved.
LOCK/UNLOCK TOUCHSCREEN DISPLAY