3
BeneVision N1
Quick Reference Guide
information is entered into the monitor.
Enter Demographics from the Central Monitoring System (CMS)
If the N1 monitor is connected to the CMS, entering patient information at
the CMS will enter the patient information into the N1 monitor. In addition,
entering demographic information into the N1 monitor will automatically enter
information into the CMS.
Enter Demographics from the ADT Database
If the N1 monitor is connected to a hospital’s ADT server the patient
demographic information can be imported into the N1 monitor. To import
patient information from the Hospital’s ADT server:
a. Enter the Find Patient dialog in either of the following ways:
• Select the Main Menu
quick key, and select Find Patient from the
Patient Management
column.
• From the Patient Management dialog select
Find Patient.
b. Verify the ADT tab is selected.
c. Enter search field such as patient ID.
d. Select Search to display a list of the search results.
e. Select a patient from the patient list.
f. Select
adjacent to the patient information N1 monitor to import that
patient’s information and return to patient management.
g. Select OK to confirm and return to the main screen.
Note: Find patient from the ADT server is only enabled if ADT Query is
supported.
Note: Loading patient information from the ADT server updates only patient
information in the N1 monitor. The patient’s monitoring data is unaffected.
Discharge a Patient
The Discharge function clears all patient information and restores default
(preconfigured) settings.
• Swipe down the touchscreen with two fi ngers, and select Discharge to
confi rm.
To Next Page
Loading...
Need help?
General
