Mindray Consona N9 Exp - Page 116

6 - 2 Operator’s Manual
6 Image Acquisition
In 3D/4D mode, the layout of the touch screen is as follows:
2. Parameter
selection area
Displays the parameters in the current imaging mode or function.
• Parameter magnitude setting: Click or to increase/ decrease
the value.
• ON/OFF setting: some of the parameters only can be set at ON or
OFF, ON is to activate the function, and when the function is
activated, the key is highlighted.
• Page selection: if the parameters cover more than one pages, slide
left and right to turn pages.
• Parameter submenu: for the parameter with icon, tap to display
the submenu to select the desired value.
• Functional item: tap to go to the corresponding function.
3. Entrance of other
applications
Displays the available application modes related, click to enter the
modes.
Custom application mode entrance:
1. Tap > on Entrance of other applications area at the bottom of
the touch screen.
2. Press and hold an application under the [Available] area, drag it to
the [Selected] area. Applications under the [Selected] area will be
displayed on the touch screen.
3. Tap to delete the application mode. Deleted applications will not
be displayed on the touch screen.
4. Drag the application under [Selected] area up and down to change
the display position. Tap [Save] to save customization settings.
No. Item Description
1. Mode displaying
area
Displays the current modes and the available application modes related,
click to enter the modes.
2. Parameter
selection area
Displays the parameters in the current imaging mode or function.
• Parameter magnitude setting: Click or to increase/ decrease
the value.
• ON/OFF setting: some of the parameters only can be set at ON or
OFF, ON is to activate the function, and when the function is
activated, the key is highlighted.
• Page selection: if the parameters cover more than one pages, tap the
Main tab or Sub tab to find more.
• Parameter submenu: for the parameter with icon, tap to display
the submenu to select the desired value.
• Functional item: touch to go to the corresponding function.
3. Parameter
adjusting area
Tap parameter button and rotate <Angle> to adjust.
No. Item Description