4 Setup
Operator’s Manual 4 - 25
2. Select the template to be modified from the list.
3. Select [Edit] to enter the report editing page.
4. Click [OK] to confirm the settings.
Setting Default Templates
Perform the following procedure:
1. Select the [Report] on the [Measure] page.
2. Select a report template from the list.
3. Click [Default].
4. Click [OK] to confirm.
4.4 Comment Preset
You can preset the custom comments library for current exam mode. The comments in the library
are provided by the system or user-defined ones.
4.4.1 Comment Configure
Add comments
Directly enter user-defined comment texts, or select available items (select comment texts for the
comment library or select comment in groups).
• Directly enter user-defined comment texts: posit the cursor in the field box above [Add
Comment], enter the text comment through the keyboard, and then click [Add Comment].
Then the directly-entered comment will be added to the Available Items and Selected Items.
• Select available items: First select a comment library and "Comment" from the drop-down lists
beside "Available Items", and then all items will be displayed below “Available Items”. Or
Select "Group" from the drop-down list beside "Available Items", all groups will be displayed
below “Available Items”.
– Click [>] to add the item in Available Items on the left into Selected Items on the right.
– Click [>>] to add all items in Available Items on the left into Selected Items on the right.
Change position of the selected items
Select an item on the right side box and click , , or button to change the position of the
item.
Withdraw or delete a user-defined comment
• Withdraw an item (from the library or user-defined) in the Selected Items list:
– Click [<] to withdraw selected Items to the Available Items list.
– Click [<<] to withdraw all items in Selected Items.
• Delete a user-defined item in the Available Items box: You can only delete the user-defined
items rather than the items in the system library. After a user-defined item is deleted, it will not
be available.
Select a user-defined item in the Available Items box, and click [<].
List Config
Select a desired group from the drop-down list.
To Next Page
Loading...
