Mindray Consona N9 Exp - Page 73

4 Setup
Operator’s Manual 4 - 7
3. Select the data file to load or export, click [OK] to confirm.
The imported user-defined table for FG and GA must be a *.csv file. The format of the *.csv file is
described as follows:
•FG table
•GA table
NOTE:
• Fill in the table according to the actual clinical values, except for those cells with bold text.
• Value of standard deviation. Select from one of the following: None, ±1SD, ±2SD, 3%~97%,
5%~95%, 10%~90%.
• Unit of the measurement value: according to the table to import, select from mm, cm, g, kg,
cm² or mm².
• Row number (N) of the table: the maximum row number N in the column “No.”
• The third row is empty.
Table Type Author Name SD Type Meas Value
Unit
SD Unit
FG The author name Value of standard
deviation
Unit of the
measurement
value
Unit of the
standard deviation
Row Num Row number (N)
of the table
No. GA Min Meas Value Max
1 GA value Minimum value Measurement
value
Maximum value
2 …………
……………
N …………
Table Type Author Name SD Type Meas Value
Unit
GA The author name Value of standard
deviation
Unit of the
standard deviation
Row Num Row number (N)
of the table
No. Meas Value SD(-) GA SD(+)
1 Measurement
value
Standard
deviation (-)
GA value Standard deviation
(+)
2 …………
……………
N …………