Setup 12-7
Key function setting
You can set the functions for <Save>, <Print>, user-defined keys (including F3, F4, F5, F6,
F12 and P) and two-finger gesture. See “3.8.4 Touch Screen Operation” for details about two-
finger gesture operation.
To assign a function to a key:
a) Click to select the desired key in the Key Function column on the left side of the page.
b) Click to select a function in the Function area. You can see the available functions
selected on the right side.
c) Click [Save] to complete the function setting.
Foot switch function setting
You can assign a function to the left/middle/right key of the foot switch. The method is similar to
setting key functions. See the steps above.
Other Settings
Item Description
Key Volume To set the key volume at 3 levels, 0 means no sound.
Control Panel Brightness To set the brightness for the control panel.
Trackball Speed To set the speed of the trackball when moving the trackball.
12.1.7 Gesture
The gesture setting is the same with the settings of other keys. See Chapter "12.1.6 Key
Configuration" for details.
To Next Page
Loading...
Need help?
General
