mindray
DC7 Diagnostic Ultrasound System
22
Figure 15 Send to DICOM Storage by User-defined Key
2. In Storage Preset -> DICOM Service, set the default storage server (one or
more).
3. In current exam, press <F5> (according to the user preset), the system will
save and send a single-frame image to remote DICOM storage automatically.
When pressing <F6>, the system will save and send a multi-frame image to
remote DICOM storage.
When the system is connected to external storage media, it allows saving the image as
DCM format. The detailed operations are as follows:
1. Select images or exams (with image) in iStation, click [Send].
2. In the dialog box popped up, select the [Destination] as connected external
media.
3. Select “Export Image” and “DCM”; after confirming, click [OK], the selected exam
or the image(s) of the exam can be sent to the specified external media with the
format of DCM, as shown in Figure 16.
To Next Page
Loading...
