Mindray DICOM - Page 41

mindray DC7 Diagnostic Ultrasound System
39
The MAGNIFICATION Types supported by Horizon CI DICOM printer conformance
statement are listed in table below:
MAGNIFICATION
TYPE
NONE
REPLICATE
BILINEAR
CUBIC
BICUBIC
MITCHELL
LANCZOS
SHARP1
SHARP2
SHARP3
AE TITLE settings that specified in Horizon CI DICOM printer conformance statement are
listed in table below:
System Job Settings File Corresponding Use
Print_SCP Used for DICOM. Does not contain any print
parameter settings.
If the media type or size is not included in the DICOM
attributes sent to the imager, the imager detects the
image type and selects the media type and size as
follows:
For grayscale images, uses the media set for
Grayscale in the Default Media menu at the control
panel.
For color images, uses the media set for Color in
the Default Media menu at the control panel.
DefaultGrayscale Imager uses the media set for Grayscale in the
Default Media menu at the control panel
DefaultColor Imager uses the media set for Color in the Default
Media menu at the control panel
8x10-dvf 8x10 DirectVista film (blue)
8x10-dvfb 8x10 DirectVista film (blue)
8x10-dvfc 8x10 DirectVista film (clear)
8x10-dvp 8x10 DirectVista paper
8x10-cvf 8x10 ChromaVista film
8x10-cvt 8x10 ChromaVista film
11x14-dvf 11x14 DirectVista film (blue)
11x14-dvfb 11x14 DirectVista film (blue)
11x14-dvfc 11x14 DirectVista film (clear)
11x14-dvp 11x14 DirectVista paper
11x14-dvp 11x14 DirectVista paper