Mindray DP-50 Vet - Page 155

DICOM 10-7
DICOM print setting items are described as follows:
Name
Description
Device
After you set the server (s) in DICOM Server Setting, the
name (s) will appear in the drop-down list, select the name
of the print server.
Service Name
Default is xxx-Print, and it can be modified.
AE Title
Application Entity title. Here, it should be consistent with that
of the print server.
Port
DICOM communication port, 104 by default. Here, the port
should be consistent with that of the print server port.
Advanced
Preset
Maximum
Retries
Range: 0-9.
Interval
Time(s)
Reserved feature.
Timeout
Refers to time after which the system will stop trying to
establish a connection to the service. Value: 5－60s, in
increments of 5s, and 15 by default.
Copies
Refer to copies of printed files. You can select among 1
through 5, or directly enter the number.