Mindray DP-50 Vet - Page 38

2-10 System Overview
No.
Name
Description
Function
9
iStation
/
Press to enter or exit the animal information
management system.
10
F1
User-defined
key
You can assign a function to the key.
11
Biopsy
/
Press to show or hide the biopsy guide line.
12
Setup
/
Press to open/close the setup menu.
13
Del
/
Press to delete the comment, etc.
14
/
Alphanumeric
keys
Same as on PC
15
Dual
Dual-split
screen
Press to enter Dual mode from non-Dual mode;
Press to switch between windows in Dual mode.
16
Quad
Quad-split
screen
Press to enter Quad mode from non-quad mode;
Press to switch between windows in Quad mode.
17
Steer
/
Press to activate the steer function for linear
probe.
18
/
Direction key
To adjust LCD brightness or contrast when
pressing with <Fn> key.
19
Cine
/
Press to enter or exit the cine review status.
20
Body Mark
/
Press to enter or exit the Body Mark status.
21
Arrow
/
Press to enter or exit the arrow comment status.
22
Clear
/
Press to clear the comments or measurement
calipers on the screen.
23
Scale
/
Press to adjust image parameter of Scale.
24
Baseline
/
Press to adjust image parameter of Baseline.
25
Menu Nav.
/
Multifunction button
26
/
/
To adjust the image parameter combed with the
key of Scale/Baseline/Nav.Rot
27
3D/4D
/
Press to enter or exit the 3D status.
28
Cursor
/
Press to show the cursor.
29
/
Trackball
Roll the trackball to change the cursor position.
30
Set
/
Press to confirm an operation, same as the left-
button of a mouse.
31
PW
/
Press to enter PW mode
32
Color
/
Press to enter Color mode
33
M
/
Press to enter M mode
34
B
/
Press to enter B mode
35
Measure
/
Press to enter/ exit Application Measurement