Mindray ePM 10M User Manual

D - 12
XX Conflicts
(XX refers to the module
label)
Prompt / The same type of corresponding module being
used exceeds the supported number. Remove
the conflict module.
XX Measurement has
been closed
(XX refers to the module
label)
Prompt / The parameter module is disabled. Switch on the
module if you want to use it. For more
information, see
3.11.1Switching On or Off a
Parameter
.
The display setup for XXX
is disabled.
(XX refers to the
parameter label)
Prompt / The parameter of the newly inserted module is
not displayed on the screen. Select a desired area
to display the parameter numerics and
waveforms. For more information, see
27.11The
Other Settings
.
The patient data storage
space is nearly full. Please
delete some discharged
patients.
Med B Delete unnecessary earlier discharged patient.
Alarm message Default priority Indication on
alarm reset
Cause and solution

Mindray ePM 10M Specifications

General

Brand	Mindray
Model	ePM 10M
Category	Medical Equipment
Language	English