Need help?Do you have a question about the Mindray WATO EX-55Pro and is the answer not in the manual?
General| Brand | Mindray |
|---|---|
| Model | WATO EX-55Pro |
| Category | Medical Equipment |
| Language | English |
This document is the Service Manual for the WATO EX-55Pro/65Pro Anesthesia Machine.
Adherence to warnings, cautions, and notes listed in the manual is required for safe operation.
Lists critical warnings regarding anesthetic gases, oxygen lubricants, fire hazards, electric shock, and explosion hazards.
Provides cautions related to high-pressure gases, periodic maintenance, cleaning agents, and electrostatic discharge.
Describes the hardware system components including mother board, power, main unit, display, and EFCS sub-systems.
Details the pneumatic system, including circuit diagrams, components, and gas supplies.
Lists materials required before installation and customer responsibilities.
Provides instructions for assembling the anesthesia machine components after unpacking.
Ensures the equipment is intact, components attached, and gas supplies are correct.
Details the self-test sequence to ensure alarm and hardware functionality.
Covers automatic and manual circuit leak and compliance tests for pneumatic system integrity.
Tests for O2, N2O, and Air pipeline supply to ensure proper pressure and functionality.
Tests the O2, N2O, and Air cylinder supply systems for pressure and leaks.
Details tests for check valves, bellows, and system leak tests in manual and mechanical ventilation.
Covers tests for O2 concentration, minute volume, apnea, airway pressure, and system alarms.
Details calibration procedures for sensors and modules.
Provides tools for diagnosing the status of valves.
Enables factory configuration of various system settings.
Outlines the schedule for physical checks, disposable replacement, and performance checks.
Defines the maintenance schedule, including preoperative checks and system checks.
Lists routine tests required after maintenance to ensure normal operation.
Explains how to test and calibrate the anesthesia machine for mechanical and electrical adjustments.
Lists warnings and cautions for system calibration, including safety and general precautions.
Details calibration procedures for various system components.
Provides guidance on identifying faults by analyzing symptoms and potential issues.
Covers technical alarms related to system startup, boards, and modules.
Guides through automatic and manual circuit leak and compliance tests.
Covers identification of sensor and valve faults using the valve diagnosis tool.
Covers common hardware and electrical faults and their troubleshooting steps.
Details procedures for software upgrades and function activation using activation codes.
Outlines necessary preparations before disassembling the anesthesia machine, including tools and safety precautions.
Provides step-by-step instructions for disassembling various assemblies of the anesthesia machine.
Details disassembly of the breathing system, excluding Pre-Pak configurations.
Details disassembly of the breathing system, specifically for Pre-Pak compatible configurations.
Guides on re-installing and re-connecting electrical and pneumatic parts after disassembly.
Provides an overview of the anesthesia system's structure and replaceable parts.
Details the information required for ordering replacement parts.
Presents diagrams and tables of replaceable parts for various assemblies.
To Next Page