5-20
5.8 Factory Setup
The password set by the factory is 558188.
Choose [Main] > [Service] and then enter the password set by the factory to access the factory
setting menu.
The factory setting menu includes function activation, drive gas setting, drive gas auto switch, air
pressure switch, flowmeter standard setting, flowmeter pipeline, ACGO setting, module rack
setting, AG module setting, BIS module setting and CO2 module setting. The preceding settings
can be reconfigured only in standby mode. After you modify some factory configurations, you
have to restart the machine for the modification to take effect. After you enter the password set by
the factory, a screen as shown in the following figure is displayed.
NOTE
All setting items in the [Factory Setup] menu are enabled only in standby mode.
After you modify some factory configurations, you have to restart the machine for
the modification to take effect.
To Next Page
Loading...
