Mingda MD-400D - Notice

Notice
This machine is suitable for printing filaments within 320 degrees.
Filament
Print Temperature
Print Platform Temperature
1
PET-CF
280-320°C
60-80°C
2
PET-GF
3
PA12-CF
4
HtPA-GF
300-320°C
70-90°C
5
HtPA-CF
6
HtPA
280-320°C
70-80°C
7
ABS-GF25
250-270°C
90-110°C
8
ASA
250-270°C
90-110°C
9
S-Mulit
260-280°C
60-80°C
10
S-HtPA
270-280°C
60-80°C
11
ABS
240-260°C
80-100°C
12
PETG
230-250°C
80°C
13
TPU 95A
210-230°C
50°C
14
PVA
210-220°C
60-70°C
15
PLA
190°C
60°C
1
1-10 Recommend High Temperature
11-14 Recommend Normal
Note: Please put the high-temperature filaments in a dry box for printing, otherwise humidity
will affect the print quality.
Precautions for the Use of High Temperature Filament
If the high-temperature filament is not used up, put it in an aluminum foil bag in time. If
the filament is wet or the surface of the print has obvious drawing, it means that the
filament is damp, and it needs to be dried in an industrial oven before use.
Reference video:
Operation video and after-sales video, please refer to the video in the SD card.