30 | minnkota.johnsonoutdoors.com ©2023 Johnson Outdoors Marine Electronics, Inc.
KEEL OFFSET
3
g. In the Motor Settings menu, find and tap Setup
and Calibration.
h. In Setup and Calibration, find and tap Keel
Mount Oset.
i. Review all safety warnings. Follow the prompts in
the One-Boat Network app. If the placement of the
trolling motor is pointing forward and parallel to the
keel, tap Set. The degree of oset will show at the
bottom of the app Display.
4
j. If the trolling motor needs to be adjusted, locate the
Return button on the upper-left corner of the app
screen. Tap the Return button three times until the
Motor home screen displays.
k. Use the Steer Right
and Steer Left buttons to
point the motor forward and parallel to the keel.
l. When satisfied with the placement of the trolling
motor, locate the Motor Settings button in the
upper-right corner and tap it.
m. In the Motor Settings menu, find and tap Setup
and Calibration.
n. In Setup and Calibration, find and tap Keel Mount
Oset. If the placement of the trolling motor is
pointing forward and parallel to the keel, tap Set.
o. The degree of oset shows at the bottom of the app
Display. Tap Return to close the Keel Mount Oset
and return to the home screen.
3g
3h
3i
4n
4n
4m
4k
4l
To Next Page
Loading...
Need help?
General
