Minolta Dimage Scan Multi Hardware Manual

16
35MM FILM HOLDER FH-M1
Use the FH-M1 for 35mm negatives and unmounted 35mm slide film.
• The 35mm Film Holder FH-M1 can hold film strips up to 6 frames long.
• Blow dust off the film before placing it into the film holder.
1.Position the film holder so the
white arrow is on the top-left
side, then open the slide
mount.
• Open the slide holder by pushing up
on the two tabs from underneath.
2,Place the film in the film
holder emulsion side down.
3.Align the frames within the
scanning windows.

Minolta Dimage Scan Multi Specifications

General

Brand	Minolta
Model	Dimage Scan Multi
Category	Scanner
Language	English