Minolta Dimage Scan Multi Hardware Manual

33
INDICATOR LAMP
The indicator lamp on the front of the scanner reveals the status of the scanner.
Indicator Lamp Scanner Status
Off Set up is complete and there is no holder
inserted in the scanner.
Green – blinking slowly Scanner is busy:
• setting up (initializing).
• index scanning, prescanning, or scanning.
• autofocus, point AF, manual focus.
Green – blinking quickly If using a film holder, the scanner is busy:
• loading the film holder.
• transporting the film holder.
• ejecting the film holder.
If using the APS Adapter, the scanner is busy:
• rewinding the film in the APS adapter.
• transporting the adapter.
Green – glows steadily There is a film holder in the scanner. The
scanner is not busy.
Red – glows steadily There is a problem with the accessory panel.
If using a film holder:
The accessory panel is open. Close the
accessory panel.
If using the APS adapter:
The accessory panel is not fully open.
Open it all the way and push it until it clicks.
Red – blinks quickly The fluorescent lamp unit cover is not fully
closed.
or
The fluorescent lamp is burnt out.
or
There is a hardware malfunction. Contact a
Minolta Service facility.

Minolta Dimage Scan Multi Specifications

General

Brand	Minolta
Model	Dimage Scan Multi
Category	Scanner
Language	English