Minolta Dimage Scan Multi Hardware Manual

19
3.Place the film in the film
holder.
• Secure the film by placing it flush
against the rail on the film holder.
• Place the film emulsion side down
(p 14).
4.Press the cover firmly closed
until it clicks.
Secure the film by placing it flush
against the rail on the film holder.
Always use a properly
fitting mask with the
medium format film
holder. If no mask or a
mask that is too large is
used, refracting light will
degrade image quality.

Minolta Dimage Scan Multi Specifications

General

Brand	Minolta
Model	Dimage Scan Multi
Category	Scanner
Language	English