13
6.If required, use Manual Focus or Point AF
(p. 28 – 29).
• A new prescan will begin.
7.Crop, rotate, and flip the image as desired
(p. 23 – 25).
8.Make brightness, color, and contrast
corrections as needed.
• There are three options for making these corrections:
Variations (p. 31)
Histogram (p. 34)
Tone Curve (p. 39)
• The Variations window is recommended for beginners.
9.Click on the load job button , then
select the Job category and job file name
(p. 44).
10. Click on the Scan button.
• TWAIN/Plug-in: Scanning will begin. The scanned
image will appear in the host application’s window
(p. 46).
• Utility: You will be asked to name the file, choose a file
format, and select the destination. Scanning will begin.
When scanning is complete, the computer will return
to the utility software and image will be in the selected
destination (p. 47).
To Next Page
Loading...
