Minolta Dimage Scan Multi - Scan Output Procedures; Twain Driver;Plug-in Software Scan

46
FINAL SCAN
Once all the desired adjustments are made to the Prescan and the Scan Settings have been entered, you are
ready to make the final scan of the displayed Prescan image.
With the Prescan image displayed in
the Prescan window…
1.Click on the Scan button in the
Command window.
• The final scan will begin.
• When scanning is complete, the final scan will
appear in the host application’s window.
TWAIN DRIVER/PLUG-IN SOFTWARE
2.Save the image using the instructions for
your host application.