45
In addition to the Job settings included with the software, it is possible to create and save your own Job settings.
CREATING A JOB
DELETING A JOB
1.Set the desired settings in the Scan
Settings dialog box (p. 49).
2.Click on the Save Job button in the
command window.
• The Save Job dialog box will appear.
3.Name the job by entering a title and
select the desired category, then click on
OK.
It is possible to delete the Job you
created when it is no longer needed.
Click on the name of the job in the Job
Selection window, then press the delete
key on your keyboard.
To Next Page
Loading...
