23
MAKING A PRESCAN MEDIUM FORMAT, TEM, 16MM
Prescanning creates a scan of the image that you can apply and view color, contrast, focus, orientation, and brightness
corrections before clicking on the Scan button. This will ensure the final scan will be the best it can be.
1.Select the film type and format, then
insert the film holder.
• The Prescan window will appear.
2.Click on the Prescan button in the
Command window.
• When the prescan is complete, the prescanned
image will appear in the Prescan window.
ROTATE
Use the rotate left and rotate right buttons to correct the orientation of your image before scanning.
Click on to rotate the image 90° clockwise.
Click on to rotate the image 90° counter-clockwise.
• Changes will be reflected in the Prescan image.
To Next Page
Loading...
