56
A
DVANCED RECORDING
Auto DSP
Automatic Digital Subject Program Selection can be temporarily dis-
abled in the auto-recording menu. When disabled, the program expo-
sure mode is active. If the position of the exposure mode dial is
changed or the camera is turned off, Automatic Digital Subject
Program Selection is activated.
Drive mode
Image size
Quality
Auto DSP
Digital zoom
Single
2048x1536
Standard
On
Off
Digital zoom
The digital zoom must be activated separately in the auto-recording, Digital Subject Program, and P,
A, S, and M exposure-mode menus. The digital zoom is activated in section 3 of the P, A, S, and M
exposure-mode menu (p. 44).
The digital zoom extends the power of the telephoto position of the optical zoom by up to 4X in 0.1X
increments. The transition between the optical zoom and digital zoom is seamless. When the digital
zoom is active, the image magnification is displayed on the monitor and the focus frames change to a
single focus area. Because of the degree of magnification, the use of a tripod is recommended.
The digital zoom is operated by the zoom
lever (1). Slide the lever right (T) to zoom
in to the telephoto position of the lens.
When the digital zoom activates, the
image magnification will be displayed on
the monitor. Turn the lever left (W) to
zoom out.
Digital zoom images are interpolated to
the set image size. Some loss of quality
may be evident with images taken with
the digital zoom.
Magnification
1
To Next Page
Loading...
Need help?
General
