101
The hardware devices to be stopped will be dis-
played. Highlight the device by clicking on it then click
“Stop.”
Confirm that the access lamp is not lit and then drag the
mass-storage device icon and drop it into the trash. Turn
the camera off, and then disconnect the USB cable.
A confirmation screen will appear to indi-
cate the devices to be stopped. Clicking
“OK” will stop the device.
A third and final screen will appear to
indicate the camera can be safely discon-
nected from the computer. Close the win-
dow, turn the camera off, and then dis-
connect the USB cable.
Macintosh
To Next Page
Loading...
Need help?
General
