BASIC RECORDING
24
Focus lock prevents the AF system from focusing. This can be used with off-center subjects or when
a special focusing situation prevents the camera from focusing (p. 25).
Without lifting your finger from the shutter-release button, recom-
pose the subject within the image area. Press the shutter-
release button all the way down to take the picture.
Focus lock
Place the subject within the focus frame. Press and hold the
shutter-release button partway down.
• The focus signal indicates the focus is locked. The shutter
speed and aperture value change from white to black
indicating the exposure is locked.
•When the focus is set, an AF sensor is displayed on the live
image to indicate the point of focus.
Focus range
0.57m - ∞ (1.9ft - ∞)
All distances are measured from the CCD. See page 35
for the marco focus range.
Approximate location of CCD plane
Wide-angle position
2.07m - ∞ (6.8ft - ∞)
Telephoto position
To Next Page
Loading...
Need help?
General
