88
S
ETUP MENU
Folder name
All recorded images are stored in folders on the memory card. Two folder-name for-
mats are available in section 2 of the setup menu, standard and date.
Standard folders have an eight character name. The initial folder is named
100MLT20. The first three digits are the folder’s serial number, which will increase
by one each time a new folder is created. The next three letters refer to Minolta,
and the last two numbers indicate the camera used; 29 indicates a DiMAGE Z1.
A date folder name also starts with the three digit serial number and is followed by
one register for the year, two register for the month, and two registers for the day:
101YMMDD. The folder 10131219 was created in 2003 on December 19th.
With the date folder format selected, when an image is recorded, a new folder with
the day’s date is created. All images recorded that day are placed in that folder.
Images recorded on a different day are placed in a new folder with the corresponding date. If the file
number memory function is off (p. 87), when a new folder is created, the serial number in the image-
file name is reset to 0001. If file number memory function is on, the serial number in the image-file is
one greater than the last image saved. For more information on folder organization and file names,
see page 98.
100MLT29
(Standard)
10131219
(Date)
Audio signals
Every time a button is pressed, an audio signal gives a positive
confirmation of the operation. The audio signals can be turn off in
section 2 of the setup menu (p. 84). The tone of the signal can also
be changed; signal 1 is electrical and signal 2 is mechanical.
File # memory
Folder name
Volume
Off
Std. form
1
1
2
Shutter FX
Audio signals
To Next Page
Loading...
Need help?
General
