96
D
ATA-TRANSFER MODE
Choose the recommended search for a suitable driver. Click
“Next.”
Choose to specify the location of the driver. The browse
window can be used to indicate the driver location. The
driver should be located in the CD-ROM drive at
:\Win98\USB. When the location is shown in the window,
click “Next.”
Manual Installation
To install the Windows 98 driver manually, follow the instruc-
tions in the connecting-the-camera-to-a-computer section on
page 94.
When the camera is plugged into the computer, the operating
system will detect the new device and the add-new-hard-
ware-wizard window opens. Place the DiMAGE Viewer CD-
ROM in the CD-ROM drive. Click “Next.”
To Next Page
Loading...
Need help?
General
