48
A
DVANCED RECORDING
Using the continuous-advance modes
The continuous-advance drive modes allow a series of
images to be captured while holding down the shutter-
release button. These drive modes are set in section 1 of the
recording menus.
Immediately after selecting the continuous option on the
menu, a selection screen is displayed to select between stan-
dard and UHS continuous advance. Use the left/right keys of
the controller to select the continuos advance mode. Press
the central button of the controller to set the drive mode dis-
played in the bottom right corner of the screen. Pressing the
menu button cancels the operation without changing the
drive mode.
Drive mode
Image size
Key func.
Self-timer
Single
Progressive
Bracketing
Quality
Continuous
:select
:enter
Compose the picture as described in the basic recording
operation section (p. 22).
Press the shutter-release button partway down (1) to lock the
focus exposure for the series.
Press and hold the shutter-release button all the way down
(2) to begin taking pictures; focus is locked with the first
frame. When the shutter-release button is pressed and held,
the camera will begin recording images until the maximum
number has been taken or the shutter button is released.
The maximum number of frames and the rate of capture
depends on the continuous-advance drive mode selected.
See the notes section on the following page.
White balance
1
2
To Next Page
Loading...
Need help?
General
